Mengene Çizimi-Solidworks Dersi

0
1282

 Student Project 1      

In this project you will create  the components of the Drill Press Vice assembly and  assemble them together. You will also generate the drawing  views of the Drill Press Vice assembly and then  generate the BOM and  add  balloons to the drawing  view. The  Drill Press Vice is shown in Figure  1. The drawing  views of the Drill Press Vice are shown in Figure  2. The dimensions of the components of the assembly are shown in Figures  3 through 8.

Adsız

Figure 1  Drill Press Vice assembly

Adsız

Figure 2  Drawing views of the Drill Press Vice assembly

Adsız

Adsız

Adsız

Student Project 2

 

In this project you will create  all the  components of the  Shock assembly  and  then  assemble them  as shown  in Figure  9. Also create  an  exploded state  of the  assembly  and  create  the explode line sketch as shown in Figure  10. The  BOM is shown in Figure  11. The  dimensions of the components are shown in Figures  12 through 19.

Adsız


F
igure 9  The Shock assembly

Adsız

Figure 10  The exploded state of the Shock assembly

Adsız

Adsız

Adsız

Adsız

Adsız

Adsız

Adsız

Henüz Yorum Yok

CEVAPLA